RHS Stim SPI Interface Cables
The RHS stim/recording system uses a standard interface cable and connector scheme to transmit serial digital data and power over distances of several meters using the Serial Peripheral Interface (SPI) protocol.
The following RHS Stim SPI cables are available from Intan Technologies:
- RHS 3-ft (0.9 m) Stim SPI cable (Part #M4563)
(formerly part number M3203) - RHS 6-ft (1.8 m) Stim SPI cable (Part #M4566)
(formerly part number M3206)
Multiple cables may be daisy chained to span lengths of several meters (see table below).
These headstages also mate with the following Intan custom electrode adapters:
The 32-channel headstages come in two versions: with and without a 3-axis accelerometer which can be used to synchronize electrophysiological data with headstage movement.
Technical Specs | Part #C3314 RHD 32ch | |
|---|---|---|
connector type | Omnetics PZN-16 polarized nano | |
connector size | 5.7 mm x 4.3 mm x 2.0 mm | |
color | red | |
cable diameter | 3.4 mm | |
cable mass | 11.9 g/ft
7.3 g/m | |
outer jacket material | 0.013″ thermoplastic elastomer (TPE) | |
maximum cable length (16ch headstage) | 24 ft (7.2 m) | |
maximum cable length (32ch headstage) | 30 ft (9.0 m) | |
Related Products
- RHS stim/recording system
- LVDS adapter board for custom hardware development